Products
Home > Products > Proximity Access Control > Floor Controller Series
Floor Controller Series
Features
- It serves mainly for floor control. Reader is installed to identify users' identity before gaining access to any floors of the building.
- 18 sets control point of floor and one set of alarm output.
- Series connection with maximum of 3 elevator controllers for any high buildings.
- Specific proximity reader is required to link with SE-18. Maximum 3 proximity readers are able to link with SE-18.
- Emergency switch to activate all access to all floors for safety purposes.
- 20 LED indicator lights, Power light (red ), Alarm light (yellow ), Floor light (green). These functions indicate current operating conditions.
- 18 sets control point of floor and one set of alarm output. When reader is tampered with force, alarm will be activated.
- When gaining access, users should select which floor to reach within seconds or access will be void or invalid.
- Any emergencies occurred or the reader is out of order which could not identify users' access identity, Master could turn on emergency switch to activate all access to all floors for temporary. When reader is fixed, access control will be activated after turning off the emergency switch.
- Proximity readers of ST-680E and ST-660E series are available to link with elevator controller.
- Power consumption: 500mA (standby).
- Power supply: 12VDC±10％
- Operating temperature: 0~60℃ ; Humidity: 80%Rh max.
- Dimensions: 210L x 145W x 50H (mm)
- Weight: 607g
