Fingerprint

SF-2000



                                                                                                                    SF-2000P

DIMENSIONS


SF-2000 : 190L X 140W X 300H (mm)
SF-2000P : 134L x 64W x 53H (mm)

FEATURES

1.There are 1000 fingerprint registers capacity to be selected.
2.Built-in proximity card reader(EM or MIFARE system).
3.Optics-based fingerprint recognition devices.
4.No card or ID necessary for fingerprint matching.
5.Built-in interface of RS232 and RS485 switchable.
6.Additional keypad available to plug in for registration or removal of fingerprints or cards.

SPECIFICATIONS

1. No card or ID necessary for fingerprint matching. Just press your finger onto the fingerprint sensor to
    activate fingerprint matching.
2. Maximum of 1000 enrollments.
3. The capacity data input/output can reach up to 2,000 by single reader operation. When linking with
    computer, its data input/output capacity can be unlimited.
4. Built-in RS-232 and RS-485 communication interface with 32 sets and can be expanded to maximum
    of 255 sets when connected with repeater. With an optional of modem or TCP/IP for online data
    transmitting control.
5. Door open methods :
 (1) Proximity and fingerprint matching(faster).
 (2) Fingerprint matching(depends on the volume of registered fingerprint).
 (3) Proximity door opening.
 (4) Push button door opening(time zone restriction).
6. Each user can register 3 separate sets of fingerprints in case of any injured fingers unable to recognize
    when register, and the last fingerprint enrolled is set as anti-duress fingerprint.
7. Built-in access control function which has an output of RELAY and to identify validation of the card.
8. 3 LED lights(Red : POWER , Green : OK , Yellow : DENY).
9. Built-in perpetual calendar and battery.
10. 10 time zones. Every time zone has seven days (Monday to Sunday)andeach day has eight time frames
      to set.
11. Anti-tampered. Siren will be activated when it is being vandalized. Fingerprint sensor glass is made of
      tampered glass which sustains major scratches (hardness of 7 and above).
12. Specific software to alter reader number and optional sensor parameter.
13. Optional external keypad used to set single card proximity, single card number entry, and single card
     deletion.
14. Use of the same software of SF-1000 for easier operation.
15. Built-in card sensor (Frequency EM:125KHz，Mifare:13.56MHZ) .
16. Operation temperature : 0。C-55。C ; Humidity : 85%Rh Max.