|
|
   |
|
SF-2000S |
|
 
SF-2000P
|
|
DIMENSIONS |
|
SF-2000S : 190L x 140W x 300H (mm)
SF-2000P : 134L x 64W x 53H (mm)
|
|
FEATURES |
1. There are 100 fingerprint registers capacity.
2. Built-in proximity card reader(EM or MIFARE system).
3. Optics-based fingerprint recognition devices.
4. No card or ID necessary for fingerprint matching.
5. Additional keypad available to plug in for
registration or removal of fingerprints or cards.
|
|
SPECIFICATIONS |
1. No card or ID
necessary for fingerprint matching. Just press your
finger onto the fingerprint sensor to
activate
fingerprint matching.
2. Maximum of 1000 enrollments.
3. Door open methods :
(1) Proximity and fingerprint matching(faster).
(2) Fingerprint matching(depends on the volume of
registered fingerprint).
(3) Proximity door opening.
(4) Push button door opening(time zone restriction).
4. Each user can register 3 separate sets of
fingerprints in case of any injured fingers unable to
recognize
when register, and the last fingerprint
enrolled is set as anti-duress fingerprint.
5. Built-in access control function which has an output
of RELAY and to identify validation of the card.
6. 3 LED lights(Red : POWER , Green : OK , Yellow :
DENY).
7. Anti-tampered. Siren will be activated when it is
being vandalized. Fingerprint sensor glass is made of
tampered glass which sustains major scratches (hardness
of 7 and above).
8. Optional external keypad used to set single card
proximity, single card number entry, and single card
deletion.
9. Built-in card sensor (Frequency
EM:125KHz，Mifare:13.56MHZ) .
10. Operation temperature : 0。C-55。C ; Humidity : 85%Rh
Max.
|
|
|