 |
No ID or button pressing necessary for scanning and auto-matching fingerprint. |
|
Time inquiry or alteration by computer or Time and Attendance. |
|
Invalid repetition of proximity within 1 minute (time adjustable). |
|
Industrial type of wide angle backlight 128*64 LCM graphic mode display with built-in traditional Chinese and English interface shows card number and user name simultaneously. |
|
Automatic time announcement with 40 time frames to set ring. |
|
Automatic work shift switching. 40 sets of work shift to set On Duty, Off Duty, Overtime On Duty, Overtime Off Duty, Go Out, Come Back, and Self-definitions (7 available to set). |
|
Deletion of card data through Time and Attendance or computer if an employee is quitted or has lost the card. |
|
Maximum17,500 records of data when Time and Attendance is stand-alone. |
|
Alarm will be activated when the unit is being tampered with force. |
|
Access control function with RELAY output and identification of validation of card function. |
|
STR-100 receive, connect and set make report of all data and user can set any format of file for use with any other software. |
|
Built-in interface of RS-232 and RS-485. Optional of TCP/IP (built-in or external connection) to link with the reader for online data transmitting or receiving control. |
|
Backlight 16 (4x4) luminous stainless steel keypads include 12 number keys (with ＊#) and 4 function keys. 3 LED lights (Red: POWER, Green: OK, Yellow: DENY) and 4 set of attendance state display lights. |
|
Maximum enrollment of 10,000 card numbers. |
|
Maximum adjustable transmission rate up to 19200 bps. |
|
BEEP sound to indicate valid card. A set of RELAY is provided to connect with large indicator light or speaker to enhance its identification capacity when it is at noisy environment. |
|
Only one Fingerprint is needed for register function when several units are connected. The remaining units are able to set user’ data through online connection. |
|
3000 fingerprints capacity to select. Each user can register 3 separate sets of fingerprints in case of any injured fingers unable to recognize when register. Each fingerprint has to be enrolled twice to enhance its precision rate. |
|
External connection of reader for attendance sub-reader or access control sub-reader. |
|
Electricity supplies by internal battery and therefore all data in the internal memory will not be lost and system timer can be operated in normal state
when power cut occurred. |
|
Fingerprint sensor glass is made of tampered glass which sustains major scratches (hardness of 7 and above). |
|
Built-in reader module to save maximum of 10,000 cards with frequency of 125KHz/13.56MHz. |
|
Maximum proximity distance: 15cm(125KHz), 5cm(13.56MHz) (depending on types of card). |
|
Current: Standby 300mA; Operation 350mA |
|
Operation temperature: 0℃ ~ 60℃; Humidity: 85%Rh max. |
|
Dimensions: 175L x 175W x 48H (mm) |
|
Weight:1050g |
Optical-based recognition device:
